EN
Silkscreen Emulsion Remover Spray Screen Printing Emulsion Remover Concentrate
Silkscreen Emulsion Remover Spray & Concentrate Screen Printing Emulsions and capillary films are best removedas quickly as possible to preserve frames and reduce blockages. Extremely concentrated so cost-effective and compatible with both manual and automated screen cleaning processes.
- Overview
- Recommended Products
Screen printing emulsion remover powder is a ready-to-use emulsion remover.Easily removes emulsions and capillary films from your screens, and easily dissolves into water to make a reclaiming solution
J.M.N-100 |
1KG of defilm powder mixed with 45kg of water |
J.M.M-300 |
1KG of defilm powder mixed with 65kg of water |
J.M.H-500 |
1KG of defilm powder mixed with 100kg of water |
How to use
Mixing of Autostrip Powder For general use dissolve 100 grams in 10 litres (18 pints) of cold water to make 1% strength solution.
When stencils are difficult to remove use 5 litres of cold water to make a 2% strength solution. If an Automatic Stripping machine
is used a 2% solution strength is preferred for a longer solution life. Use of Autostrip Powder 1.Remove all ink residues by
applying Autosolve Screen Wash to both sides of the mesh and work in with a brush. 2.Wash both sides of mesh with water to remove
all solvent traces. 3.With a brush, apply Autostrip liberally to both sides of the mesh. 4.Leave to stand for 3 to 5 minutes while
the emulsion coating dissolves. Do not allow Autostrip to dry onto the screen as this will make the stencil difficult to remove.
5.Wash off the stencil with a strong spray followed by a high pressure gun.
When stencils are difficult to remove use 5 litres of cold water to make a 2% strength solution. If an Automatic Stripping machine
is used a 2% solution strength is preferred for a longer solution life. Use of Autostrip Powder 1.Remove all ink residues by
applying Autosolve Screen Wash to both sides of the mesh and work in with a brush. 2.Wash both sides of mesh with water to remove
all solvent traces. 3.With a brush, apply Autostrip liberally to both sides of the mesh. 4.Leave to stand for 3 to 5 minutes while
the emulsion coating dissolves. Do not allow Autostrip to dry onto the screen as this will make the stencil difficult to remove.
5.Wash off the stencil with a strong spray followed by a high pressure gun.
