EN
Hot Sale A3 Roll to Roll Dtf Uv Printer AB Film with Laminator All in One
Able to be used directly on various materials in the studio — whether glass, metal, or plastic. It is No-CHAR, User-Friendly solution• Quick Setup: Can be deployed with little to no setup. Enables continuous roll to roll printing.
- Overview
- Recommended Products
A3 roll to roll UV DTF printer with Laminator ALL IN ONE
The uv dtf printer is a uniquely designed printer, which uses the AB film as a carrier to print the pattern on the A film, and then attaches the B film through the laminating device, and the ink is quickly solidified by the UV lamp, so that our pattern printing is completed.
After that, the pattern is cut out by a cutting machine, the pattern is glued on the substrate, and the film is torn off to complete the printing.
It has simple printing steps, wide application, adjustable size, short time and good effect.
Automated Operations
In the process of using the printer, there will be no complex operation that we need to control.
Automatically feed the A film, Start the printing, Automatically laminating and collect finsh printed prints.
High Precision & Printing Speed
We can offer different printheads, Print faster and Manipulate easier.
Intelligent ink detection
Printing and laminating arecompleted at one time, eliminating the laminating machine;
High Precision & Printing Speed
We can offer different printheads, Print faster and Manipulate easier.
Control Panel & Heating system & Vacuum platform
The control screen panel is easy to operate and understand.
The temperature can be adjusted manually.
The vacuum platform can fix the film, and the printing process is not offset.
After printing, automatic heating and pressure cover B film.
Intelligent ink detection
Hoson Main board, high precision, fast speed, bright and delicate printing screen
High precision motors and guides
We will provide you instant online support service and free repair service.
We will provide you instant online support service and free repair service.
Let's see the process of UV DTF printing:
1. Print on Film A:
Film A is the printing side, tear off the protective paper, and print with the adhesive side facing up.
The printing sequenceis: white ink-color ink-varnish; 2.Lamintoring to the Film B:
The B film is hung on the support of the laminator. When laminating, the matte surface must be
attached to the glue surface, otherwise it could not be take off.
The film temperature is 80 degrees, the slower the better.
3.Cut out the desired pattern and paste it on the material to be pasted.
4.Press the pattern repeatedly, slowly tear open the film,finished.
What can this Machine do?
Feedback from Clients
